Treatment Parameters
It depends on the spot size so I will give you a few protocols
600 micron fiber one cm away from toe nail //// T on 3 ms ///// T off 30 ms //// total joules 500 joules hallux toe nail /// 250 joules less toes//// PEAK POWER 15 watts
You may have to turn down the PEAK POWER to 10-15 watts if the patients feel too much heat. or you can increase the T off 40,50 ms I prefer to keep with 15 watts and adjust the T off to 40 ,50 ms
You may have to turn down the PEAK POWER to 10-15 watts if the patients feel too much heat. or you can increase the T off 40,50 ms I prefer to keep with 15 watts and adjust the T off to 40 ,50 ms
If you can't adapt to this protocol Use 650 us Ton and 650 Toff . Some doctor have power learning how to move the handpiece so we start with this protocol and with experience move to the first protocol
Remember if its too hot and it all depends on patient you stop place finger on toe nail and press will cool the nail. Then adjust the power and or the T0ff. I like to adjust the Toff instead of reducing the peak power down from 15 to 12 watts. Also this is at least three treatments 30 days apart. This is a painting motion with the hand piece.
donna@gigaalaser.com
donna@gigaalaser.com
没有评论:
发表评论